New Products Integrated air after-cooler The DV Systems G Series of rotary screw air compressors, Nos. G20, G25 and G30, operate at a 100 percent duty cycle and are capable of continuous use applications. The compact, quiet air system has an integrated air after-cooler and the company’s CSC300 microprocessor controller. The 20hp model provides 82 scfm of air at 120 psi; the 25hp version produces 100 scfm of air at 120 psi; and the 30hp unit delivers 116 scfm at 120 psi. The units operate at 69 dBA or quieter and offer both variable speed and fix speed belt drives as well as a five-year extended warranty. Circle 29 on card, or enter at “e-inquiry” on VehicleServicePros.com Provides flood beam or spot beam The Coast Rechargeable Penlight, No. HP3R, provides 245 lm of light that can be focused. Utilizing the company’s Flex Charge Dual Power System, this light harnesses either lithium or alkaline power. By using a micro USB, users can recharge the batteries or swap out to alkaline when needed. With a diameter of approximately 0.5” (12.7mm), the compact, lightweight penlight offers high and low modes as well as twist focus. The HP3R’s Universal Focusing Optic provides a broad, consistent flood beam and a long distance spot beam. The HP3R is impact- and weather resistant, includes a pocket clip and is backed by a lifetime warranty against defects in materials and workmanship. It is tested and rated to ANSI/FL1 standards. Circle 27 on card, or enter at “e-inquiry” on VehicleServicePros.com Pistol grip or lever style The K-Tool International Heavy Duty Grease Guns, Nos. KTI73933 and KTI73942, are available with a pistol grip or lever style. Both grease guns are designed with a three-way loading, 14-oz cartridge, bulk and suction fill. The pistol grip option offers a die cast aluminum head fitted with steel block nut and operates at 5,000 psi. It comes complete with an 18” flexible hose extension and coupler. The lever style option has an aluminum die cast grease gun head fitted with bulk loaded and air release. It develops up to 10,000 psi with built-in variable stroke, comes with a 6” steel extension and coupler and features a rubber-grip handle. Both guns have a one-year warranty. Circle 28 on card, or enter at “e-inquiry” on VehicleServicePros.com VehicleServicePros.com MAY 2016 PROFESSIONAL TOOL & EQUIPMENT NEWS 11 Available in 1/4” and 3/8” The Chicago Pneumatic Butterfly Impact Wrenches, Nos. CP7711 and CP7721, are available in 1/4” and 3/8” sizes, and weigh just 1.16 lbs while measuring 5.5” long and 1.5” wide. Delivering 80 ft/lbs of max torque in reverse, the wrenches can remove or tighten fasteners in difficult-to-reach applications. The forward and reverse butterfly lever is placed on the top to ease operation, while the built-in 180-degree air inlet swivel and the threespeed power regulator are positioned at the back of the tool. These wrenches are constructed with an aluminium housing and a single-hammer mechanism. Circle 25 on card, or enter at “e-inquiry” on VehicleServicePros.com Powered by compressed air The Cortec EcoAir line of spray can products offer users fast-acting and safeto handle corrosion protection technology while eliminating waste disposal costs. The Cortec spray cans, powered by compressed air that are complete, bio-based replacement for hazardous chemical propellants, attack tough maintenance duties while remaining safe for the environment. The EcoAir line does not contain propellants, CFCs or HCFCs. They are formulated with biodegradable, non-polluting ingredients, they have no chemical propellants or traditional aerosols and are nonflammable. EcoAir products are able to spray in any direction, even upside down and are safe to ship and store. They are specially formulated to improve safety for the consumer and surroundings. Circle 30 on card, or enter at “e-inquiry” on VehicleServicePros.com Prevents problems associated with ethanol fuels The Kinetic Fuel Technology K100G Gasoline Fuel Treatment and Stabilizer offers a bio-based, all-in-one proprietary formulation that chemically binds with water, preventing problems associated with ethanol fuels, including water and phase separation, while upgrading and stabilizing fuel quality for easier starts, better mileage and reduced emissions. This fuel treatment is recommended for use in all gasoline fuels, but is especially formulated for ethanol blends. The treatment is made in the U.S.A. and serves as a water eliminator, fuel injector cleaner, lubricator and octane booster. It is available in 8-oz, 32-oz, 5-gal and 55-gal containers to treat a range of 16 to 14,080 gallons of fuel. Circle 33 on card, or enter at “e-inquiry” on VehicleServicePros.com
Professional_Tool_And_Equipment_News_May_2016
To see the actual publication please follow the link above