PTEN_66

Professional_Tool_And_Equipment_News_October_2016

Snap-on Diagnostics VERUS Edge, No. EEMS330 The Snap-on VERUS Edge, No. EEMS330, has a fully-integrated software suite, comprising diagnostics, component tests, expert information resources, a complete repair information system and vehicle data manager. Exclusive resources include SureTrack Real Fixes and verified parts replacement records, Fast-Track Troubleshooter and Guided Component Tests, along with direct access to OEM recalls, campaigns and TSBs. The built-in solid state drive, Internet browser and Wi-Fi facilitate open information access from anywhere in the bay. The thin, lightweight tablet-style device —complete with a touchscreen—boots up in a minute and from ‘ready mode’ in only five seconds. With up to five hours of battery life, it provides techs with OEM-specific coverage for more than 40 domestic, Asian and European makes and dozens of vehicle systems. CATEGORY: Scan Tools Enter 186 at “e-inquiry” on VehicleServicePros.com Lock Technology 66 PTEN OCTOBER 2016 VehicleServicePros.com Brake Re-threading Kit, No. LT993 The Lock Technology Brake Re-threading Kit, No. LT993, offers male/female combo sockets with a compact design. The kit allows the user to re-thread damaged ABS control module fittings; rethread damaged brake wheel cylinders; re-thread damaged brake master cylinder fittings; and rethread damaged brake line fittings. According to the company, these tools can perform work where standard tap and dies will not fit. The kit offers most common sizes in SAE and metric, including 3/8”-24, 7/16”-24, 1/2”-20; 5/8”-18, 10mm-1.0 and 12mm-1.0. CATEGORY: Brake Service Enter 190 at “e-inquiry” on VehicleServicePros.com Milwaukee Tool M18 FUEL 3/8” Compact Impact Wrench with Friction Ring, No. 2754-22 The Milwaukee Tool M18 FUEL 3/8” Compact Impact Wrench with Friction Ring, No. 2754-22, features the company’s Powerstate brushless motor with higher grade magnets than previous models. The tool’s RedLink Plus Intelligence has been upgraded with better heat management capabilities. The tool offers a four-mode Drive Control that includes an auto shut-off function to stop the tool after it senses one second of impacting, which prevents over-driving fasteners and damaging materials. The 5.9”, 4-lb impact offers 210 ft/lbs of torque and up to 2,500 rpm. The tool is available as a kit with two high capacity RedLithium XC5.0 2.0 compact battery packs (No. 2754-22CT) and as a bare tool (No. 2754-20). CATEGORY: Power Tools Enter 187 at “e-inquiry” on VehicleServicePros.com General Technologies Corp. Ignition System Analyzer, No. GTC505 The General Technologies Ignition System Analyzer, No. GTC505, is compatible with all common types of spark ignition systems. The GTC505 can display waveforms in real time, compare readings between cylinders and detect and display dwell angle and primary current ramp time. Additionally, the device can chart burn time, spark plug voltage, dwell/ramp time and rpm for each spark, allowing for the detection of misfires. It displays all this data on its 3.5” color TFT LCD screen. Its rechargeable Li-ion battery provides six hours of continuous use, and it passed the MIL-STD-810 drop test. CATEGORY: Engine Service and Repair Enter 189 at “e-inquiry” on VehicleServicePros.com Phoenix Systems DOT 3/4 Anti-Rust Brake Fluid Treatment The Phoenix Systems DOT 3/4 Anti-Rust Brake Fluid Treatment is an additive used to reduce premature brake part failure and increase the boiling point of brake fluid. Technicians can add 1 oz of brake fluid treatment to the master cylinder, and within four weeks, the inhibitors will re-coat the brake system from the inside out, neutralize acidity and increase the boiling point. CATEGORY: Chemicals Enter 188 at “e-inquiry” on VehicleServicePros.com Snap-on Tools Wireless Battery System Tester, No. EECS550 The Snap-on Wireless Battery System Tester, No. EECS550, allows techs freedom to maneuver around a vehicle with the main module communicating via Bluetooth to the monitoring unit connected directly to the vehicle battery. This capability eliminates the need for a second tech to perform on-screen commands, ensuring greater productivity and shop efficiency. The menu and test results display on an easy-toread, back-lit screen in eight languages. Engineered with patented conductance technology, the EECS550 detects discharged batteries down to 1V and tests 6, 8, 12 and 24V systems. This unit provides reverse polarity protection, and has an included printer. Unit weighs 3 lbs. CATEGORY: Battery Service Equipment


Professional_Tool_And_Equipment_News_October_2016
To see the actual publication please follow the link above