Power Tool
Three-position flexible head
The SP Air Reversible Flex Head
Cut-Off Tool, No. SP-7231R,
offers a three-position flexible head
designed to provide greater access in
tight work places. The tool features a
cushion grip handle, rear exhaust, safety
throttle lever, built-in power regulator, graduated trigger, direct drive
motor and metal guard. The tool cuts muffler clamps and hangers, sheet
metal, radiator hose clamps, bumper bolts and steel rods up to 3/4”.
For more information visit VehicleServicePros.com/20977978
High power-to-weight ratio
The Ingersoll Rand 35MAX Ultra-Compact Impactool
is a pneumatic tool designed to quickly loosen or tighten
a variety of fasteners in confined spaces. The 35MAX
Impactool features a high power-to-weight ratio, easy-to-operate
regulator dials with three power settings and push-button
forward and reverse capabilities. The 35MAX has a 1/2”
square drive and 450 lb-ft of maximum reverse torque. The
35MAX Ultra-Compact weighs 2.4 lbs and is 4.6” long.
For more information visit
VehicleServicePros.com/20859959
AWARD WINNING INNOVATIVE PULLING KIT
LT855 TEXAS TWISTER AIR HAMMER PULLING KIT
•
Now you can convert your air hammer into a pneumatic slide hammer with the Texas Twister
• Simply snap the Texas Twister curved air bit into the collet of your hammer with one of the bits
attached and reverse the air hammer handle in your hand now using thumb to push the hammer trigger.
• Feel the 3000 air hammer blows per minute tuning into new pulling power
• One hand operation allows you to hold parts with your other hand
• Safe controlled part removal without parts and fluids crashing to the floor
• Use 21st century air hammer pulling power to get the job done SAFE, FAST & EFFICIENT instead of a
slow, manually powered 19th century slide hammer
•
NOW INCLUDES two NEW puller connectors - ½-20 to 5/8” and ½”-20 to 3/4” to
connect the Texas Twister to your 5/8” & 3/4” slide hammer bits and pullers
• Extend the reach of the tool by using the 20” extension
• Safe, powerful, fast, simple effective air hammer bits you will use every day
• Comes packaged in a custom plastic tray with a custom black ballistic nylon carrying case
VehicleServicePros.com/10095030
March 2018 | VehicleServicePros.com 13
air hammer
not included
PATENT #7,036,211
ADDITIONAL PATENTS PENDING
Category:
Tool Accessories
Four-mode drive control
The Milwaukee Tool
M18 Fuel High Torque
Impact Wrench with
1/2” Friction Ring, No. 2767-
22, is designed with a four-mode
Drive Control feature that allows
users to switch between modes to
match the power and speed
to the application. The Bolt
Removal Mode provides maximum
nut-busting torque to
remove the most stubborn
bolts or nuts, according to the
company. This wrench offers 1,000 lb-ft of
fastening torque and 1,400 lb-ft of nut-busting
torque. The tool includes two M18 High
Capacity Redlithium XC5.0 battery packs, a
multi-voltage charger and case. The friction
ring mechanism is designed for frequent socket
changes and ease of use.
For more information visit
VehicleServicePros.com/20974100
Low maintenance and low vibration
The Chicago Pneumatic CP66
Nutrunners offer high power, low
maintenance and low vibration. These
nutrunners weigh as little as 8.3 lbs and
are equipped with a sturdy stabilizing
arm to aid operator comfort. These
tools are designed for flange-related
and other bolting applications, and are
designed to provide a more durable,
powerful and safer alternative to an
impact wrench. With models capable of
delivering 96 lb-ft, 1,900 lb-ft or 3,100
lb-ft of torque, these nutrunners are
designed to deliver the right amount of
torque to tighten or loosen bolts ranging
from 20mm to 45mm.
For more information visit
VehicleServicePros.com/20982664
/20977978
/20859959
/10095030
/VehicleServicePros.com
/20974100
/20982664
/www.ltitools.com
link