K i t t
DO YOU WORK ON GERMAN BRAKE CALIPERS?
LT4995 GERMAN VEHICLE BRAKE CALIPER SOCKET AND BIT SET
• Works on all German vehicle brake caliper applications
• Audi, BMW, Mercedes Benz, Porsche, VW
• Packaged in a custom blow molded case
• Every German vehicle brake caliper socket/bit when you need it
• Lifetime warranty
• Patent Pending
• Includes -
3/8” Drive Bits
NEW
PRODUCT
1/4” Drive Bits
9mm x 20mm
½” Drive Sockets
11.5mm x 50mm
AS22 x 48mm
7mm x 24mm
8mm x 24mm
9mm x 50mm
7mm x 65mm
7mm x 92mm
11mm x 100mm
ROTATING RING LUG NUT REMOVAL MADE EASY
LT4569 GERMAN VEHICLE ROTATING RING LUG NUT REMOVAL KIT
• Easily remove rotating ring lug nut locks from Audi, BMW,
Mercedes Benz, Porsche, VW
• Use LT4569A Silicon Welding Shield to protect wheel from
heat damage while you Mig weld rotating ring to lug nut
• With rotating ring welded to lug nut, use included twist
socket (LT4569B) to remove lug nut
• Safe, Fast, Easy solution to rotating ring lug nut locks
• LT4569A consumable item with factory defect warranty only
• LT4569B has a lifetime warranty
• Patent Pending on LT4569A Silicone Welding Shield
20 PTEN DECEMBER 2017 VehicleServicePros.com
LT4569B
LT4569A
NEW
PRODUCT
IN USE READY FOR REMOVAL
Circle 52 on card, or enter at “e-inquiry” on VehicleServicePros.com
Low-profile knurled
thumb wheel
The Cornwell Tools 3-pc Quarter Stick
Ratchet Set, No. EC4S3XL, contains
the following low-profile ratchet sizes:
11.75”, 8” and 4.5”. These ratchets offer a
1/4” square drive on one end and a magnetic
bit drive on the other. Both drives
are reversible and include a low-profile
knurled thumb wheel for tight areas.
These ratchets feature a 15-degree offset
and are designed for body work, under
dash, motorcycles, fan cowls and other
hard-to-reach areas.
Circle 51 on card, or enter at “e-inquiry” on
VehicleServicePros.com
Turns smartphone into
diagnostic tool
The Autel MaxiAP AP100 Scan Tool
is designed to turn an iOS or Android
device into a diagnostic tool that can
scan a vehicle’s powertrain and monitor
its performance. This tool is compatible
with European, Asian and U.S. OBD-II/
EOBD-enabled vehicles from 1996-present,
and includes a Bluetooth OBD-II
connector and free app. Notable features
include reading/clearing DTCs, Mode 6,
1/M readiness, freeze frame and live data,
retrieve vin, repair reports, O2 sensor
monitor and vehicle status.
Circle 53 on card, or enter at “e-inquiry” on
VehicleServicePros.com
Keeps consistent
tension on blade
The Constant Pressure Tube Cutter
from Cal-Van Tools uses a spring to keep
consistent compression on the cutting
blade to the tube. This constant pressure
is designed to allow users to cut through
thin walled steel tubing without having
to continually tighten or readjust the cutter.
Users can turn the adjustment handle
until the alignment marks line up, then
turn the cutter until the tubing is cut, the
company says. This tool can cut a range of
tubing from 1/8” to 1-1/8”, and features a
replaceable blade.
Circle 49 on card, or enter at “e-inquiry” on
VehicleServicePros.com
Wide, stay-open top
The Klein Tools Tradesman Pro Wide-
Open Tool Bag, No. 55469, offers 42 pockets
in varying sizes inside and out: exterior
front and back pockets for tools or small
parts, mesh side pockets for tools and
equipment, 33 interior pockets for tools,
parts and gear and a large interior zipper
pocket. The bag features a wide, stay-open
top, fully molded bottom for protection
from the elements and an orange interior
designed to make finding tools easier. The
bag has handles and a shoulder strap with
extra padding for comfort while carrying.
Circle 50 on card, or enter at “e-inquiry” on
VehicleServicePros.com
/VehicleServicePros.com
/VehicleServicePros.com
/VehicleServicePros.com
/VehicleServicePros.com
/VehicleServicePros.com
/VehicleServicePros.com
/www.ltitools.com
link