SNEAK PEEK
EQUIPPED WITH A JUMP
STARTER, TIRE INFLATOR
AND 3 TON JACK
The All-in-One Emergency Tool, No.
24468, from OEMTOOLS, is equipped with
a jump starter, tire inflator and automatic
3 ton jack to get vehicles back on the road.
The tool also includes an LED flashlight to
illuminate the area while jump starting a
vehicle or changing a flat tire, and uses a
12,000mAh Li-ion battery that can hold a
charge for up to six months, according to
the company.
Enter #46 at “e-inquiry" on
VehicleServicePros.com
Enter #48 at “e-inquiry" on VehicleServicePros.com
24 Professional Distributor I September 2018 I VehicleServicePros.com
MULTI MULTI-DIRECTIONAL
DIRECTIONAL
MAGNETIC SWIVEL BASE
The E-Z Red Xtreme Rechargeable Magnetic
Logo Work Light, No. XLM500, is a compact,
powerful worklight that provides 500 lm on the
high setting and 250 lm on low. The XLM500
series worklights are available in three colors:
red, green and orange. The multi-directional
magnetic swivel base accessory enables
hands-free usage. An adjustable handle makes
this light easily portable on the job. This light
recharges with an included micro-USB cord and
has a run-time of up to three hours.
Enter #47 at “e-inquiry" on
VehicleServicePros.com
FEATURES BLUETOOTH
WIRELESS TECHNOLOGY
The Pelican 7 Series LED Tactical
Flashlights offer the ability to reload multiple
battery choices including AA, CR123 and
rechargeable. The lights are manufactured
with an aluminum body and type III hard
anodized finish. These flashlights feature
Bluetooth wireless technology, allowing the
user to personalize modes (up to five switch
sequences with varied light levels and/or
flashing modes) through an app. The light
also offers wireless USB charging, full-time
battery level indicator, five selectable programs
and four modes: high, strobe, medium
and low. All Pelican 7 Series flashlights
are covered by a lifetime warranty.
Enter #45 at “e-inquiry" on
VehicleServicePros.com
CORRECT OFF-CENTER WHEEL
STUD ALIGNMENT
The Ken-Tool Pilot Sleeve is a line of wheel
centering sleeves for steel or aluminum commercial
truck steer wheels, drive wheels and
inside/outside dual wheels which use twopiece
flange nuts. The sleeves are designed
to correct off-center wheel stud alignment on
wheel mounting holes, which if uncorrected,
can lead to out-of-tolerance radial wheel
runout, the company says. The sleeves are
made from durable, non-corrosive mil-spec
grade polyamide polymer, and the self-sizing
sleeves take up the gap between the 22mm
wheel studs and the 26mm wheel mount holes.
These patent-pending sleeves are available in
a 6-pc package (No. 30331) and in bulk pails of
100-pc (No. 30332) and 1,000-pc (No. 30333).
Enter #49 at “e-inquiry" on
VehicleServicePros.com
/VehicleServicePros.com
/VehicleServicePros.com
/VehicleServicePros.com
/VehicleServicePros.com
/VehicleServicePros.com
/VehicleServicePros.com
/www.ernstmfg.com