28 PTEN AUGUST 2018 VehicleServicePros.com
CORRECT OFF-CENTER WHEEL
STUD ALIGNMENT
The Ken-Tool Pilot Sleeve is a line of wheel
centering sleeves for steel or aluminum commercial
truck steer wheels, drive wheels and
inside/outside dual wheels which use twopiece
flange nuts. The sleeves are designed
to correct off-center wheel stud alignment
on wheel mounting holes, which if uncorrected,
can lead to out-of-tolerance radial
wheel runout, the company says. The sleeves
are made from durable, non-corrosive milspec
grade polyamide polymer, and the
self-sizing sleeves take up the gap between
the 22mm wheel studs and the 26mm wheel
mount holes. These patent-pending sleeves
are available in a 6-pc package (No. 30331)
and in bulk pails of 100-pc (No. 30332) and
1,000-pc (No. 30333).
Circle 96 on card, or enter at “e-inquiry” on
VehicleServicePros.com
AUTOMATIC
LOW-FLOW CUTOFF
The Polyvance 6049-C Nitro Fuzer Lite
offers automatic low-flow cutoff to prevent
heating element burn-out; precision flow
control on both air and nitrogen sides to
allow for welding anything from super-thin
tabs to heavy tuck side panels;
analog flow meter for repeatable
welder setup; 13 types of
plastic welding rod; and made
in the USA construction.
There is a manual
switch between air and
nitrogen gas, the cart
requires assembly by
the end user and free
courtesy training is
not included (there
is an included sheet
of QR codes techs can
scan with a smartphone
for instant, on-demand
video training).
Circle 95 on card, or enter at “e-inquiry” on
VehicleServicePros.com
OFFERS BUILT-IN WI-FI
The Bosch ADS 325 Scan Tool allows technicians
to diagnose, research and repair
vehicles in one solution. The easy-to-use
interface offers coverage for Domestic, Asian
and European brands with one subscription.
Users can Auto ID CAN vehicles, read/clear
DTC types from all controllers, view data
PIDS, perform bidirectional controls, calibrations,
resets and relearns. The tool comes
equipped with on-tool and online repair
information including confirmed fixes, maintenance
procedures, component locations
key programming and more. This tool offers
built in Wi-Fi and Firefox for open browsing,
and runs on Android 5.0 with a 64 GB SSD.
Circle 94 on card, or enter at “e-inquiry” on
VehicleServicePros.com
SLOTTED SIDES AND
TOP FOR VISIBILITY
The Branick Industries Model 2010 Utility
Tire Inflation Cage is a patent-pending inflation
cage designed
to improve safety
when inflating
NHS tires
such as lawn
and garden, golf
car t, scooter
and other small
tires. The Model
2010 has slotted sides
and top to give visibility to the
tire while still providing protection from the
small debris common with utility tire failures.
The sloped top helps strengthen the
cage and prevent items being place on top
that can become projectiles in failure, the
company says. The Model 2010 holds tires
up to 16” wide and 20.5” in diameter with
pressures up to 100 psi, and requires 20” by
20” of floor space.
Circle 97 on card, or enter at “e-inquiry” on
VehicleServicePros.com
EXTRA LEVERAGE FOR
HEAVIER VEHICLES
The Zendex GoJak SUV, No. 7016, is rated for
up to 7,000-lb vehicles and features a super
heavy duty GF Nylon caster and an extra
wide steel axle. The pedal on this model is
longer than on other GoJak models, providing
extra leverage for heavier vehicles.
A straight axel design allows wider tires to
overhang the jack on the inside, allowing it to
accommodate up to a 16” wide individual tire
or 10” wide dual tires. The GoJak includes
offers a seven-year limited warranty, and a
two-year caster warranty.
Circle 99 on card, or
enter at “e-inquiry” on
VehicleServicePros.com
LIFTS THE INJECTOR
STRAIGHT OUT WITHOUT
ROCKING THE PART
The SP Tools Injector Puller
Kit, No. 16400, is
designed to remove
diesel injectors from
2011 to 2016 GM vehicles
equipped with the
LML Duramax engine.
Over time and with
many miles, the injectors
become heavily
coated with carbon
between the tip and cylinder head,
causing them to stick together. When
using a factory tool, it rocks the injector
and causes binding into the head. This
may cause damage to the costly injector. The
16400 Duramax Injector Puller lifts the injector
3/4” straight out without rocking the part.
This significantly reduces the possibility of
damaging the fuel injector or cylinder head
and saves valuable time for the technician.
Circle 98 on card, or enter at “e-inquiry” on
VehicleServicePros.com
/VehicleServicePros.com
/VehicleServicePros.com
/VehicleServicePros.com
/VehicleServicePros.com
/VehicleServicePros.com
/VehicleServicePros.com
/VehicleServicePros.com