Tire and Wheel Service
Circle 227 on card, or enter at “e-inquiry” on VehicleServicePros.com
78 PTEN AUGUST 2018 www.VehicleServicePros.com
HELPS REDUCE CLAMPING TIME
The ARI-Hetra 32” Center-Post Swing Arm Tire Changer,
No. WS-18600, is designed to combine the familiar swing-arm
tire changer with the versatility of a
center-post. This tire changer features
a center locking system that helps
reduce clamping time. This tire changer has
a maximum tire diameter of 47”. The pedal
controlled two-speed rotation allows users
to adjust torque as needed. The standard configuration
includes an independently operated
bead press device and dual-height bead rollers.
Circle 228 on card, or enter at “e-inquiry” on
VehicleServicePros.com
FEATURES BUILT-IN VEHICLE SUPPORT
The MAHLE Service Solutions ShopPRO CWL-10
10-Ton Commercial Wheel Lift is designed to provide
access to major components on all types of vehicles.
The CWL-10 is suited for shops with low ceiling heights
and features a built-in vehicle support stand that allows
complete open access under the vehicle. The portable
design helps eliminate the need for a dedicated bay.
The lift has a maximum lifting height of 24”. A dual
trigger control valve allows for synchronized
raising and lowering of a vehicle.
Circle 229 on card, or enter
at “e-inquiry” on
VehicleServicePros.com
SEPARATES TIRES FROM RIMS
The OTC Bead Breaking Tool Set, No.
5726, is designed to break down automotive,
motorcycle, ATV and small garden
tractor tires. This tool helps technicians
separate tires from their rims. The two-tool
set includes a locking plier and pry tool. The
locking plier features a wedged jaw that is
forced into the tire bead when clamped on
the wheel rim. The pry tool is then hooked
with the plier jaw, acting as a second wedge
to break the bead and separate the tire from
the room. The 5726 is covered by OTC’s
lifetime warranty.
Circle 224 on card, or
enter at “e-inquiry” on
VehicleServicePros.com
ACCURACY WITHIN
+/- 1.6 PERCENT
The K Tool International
(KTI) Tire Inflator
Gauge, No. KTI89005,
i s des igned for
measuring, inflating
and deflating vehicle
tires with accuracy
within +/- 1.6 percent.
Made of aluminum die
cast, the body is heavy
duty. The gauge comes
fitted with a 2-1/2"
mechanical pressure
gauge with protective
shroud for monitoring tire pressure, 24” long
flexible hose to attach to tire valves and a
steel extension with grip. It has a built-in
swivel and dual chuck for truck tires. The
gauge is equipped with a 1/4” NPT inlet, has a
maximum pressure of 230 psi, and is covered
by a one-year repair or replace warranty.
Circle 225 on card, or enter at “e-inquiry” on
VehicleServicePros.com
ICON-BASED INTERFACE
The Hamaton H46 TPMS Programming
Tool features a
colored iconbased
interface
to help guide
users through
replacing and
servicing TPMS
sensors. The H46
displays all sensor
data, including
ID, tire pressure,
tire temperature
and battery status.
With the addition of
the optional OBD-II
module, users can reset the ECU in less than
two minutes, according to the company. The
H46 is designed to support all known programmable
TPMS sensors and is frequently
updated with new features and up-to-date
vehicle and sensor coverage.
Circle 226 on card, or enter at “e-inquiry” on
VehicleServicePros.com
/VehicleServicePros.com
/VehicleServicePros.com
/VehicleServicePros.com
/VehicleServicePros.com
/VehicleServicePros.com
/VehicleServicePros.com
/www.VehicleServicePros.com
/iatn.net